API 235L

Discrete Channel Noise Gate

Features

Threshold control from -45 to +25 dBu

Variable Fine Adjustable Depth to -80 dB

Adjustable Release/Hold Time, 50m/sec to 3 sec

2:1 Expander or Noise Gate Selection

Release or Hold Switch for Release control knob

Always at Unity Gain, Regardless of settings

LED Gain Reduction Meter

Uses the API 2510 and API 2520 Op-Amps

Transformer Output, to +28 dBu

The API 235L Noise Gate/Expander is a new product design, as API has not offered a gate module since 1974. The 235L is a great sounding gate/expander with the ability to reduce noise in any type of program. The 235L can open unusually fast, without losing any part of the sound. Its extreme flexibility, repeatable settings, and superb sound make it ideal for all studio, live sound, and broadcast applications.

The API 235L Noise Gate/Expander is one of the fastest noise gates manufactured today. When an engineer is faced with program material with a high level of background noise, the 235L can either Gate the signal at a preset Threshold, or with the use of the Expander function, can reduce the background noise to an almost undetectable level. This can be achieved wiithout the typical loss of the program material caused by slow triggering of the signal, or "pinging" caused by false triggering.

With a wide range of adjustment, the 235L can operate from -45 to +25 dBu, fitting into any audio situation regardless of program level. Once the Threshold level is set, the Attack time can be selected to react faster than 100 micro seconds or slightly slower than 25 milli-seconds to reduce false triggering. Although the Depth control has a full range of -80 dB, the scale is expanded in the first half of rotation so 0 to 9 dB is available for fine tuning of subtle, undetectable gating. The second half of rotation is from 10 to 80 dB for more drastic noise reduction.

The Expander function is a 1:2 ratio, allowing the signal to "sneak up" to the full signal level without any loss of "under threshold" nuances of vocals and percussion. Setting the threshold in the Gate function to the desired level, then switching to the Expander mode is the perfect setup.

For special gating functions such as the famed "gated snare reverb", the Release function can be switched to Hold, and the Release control becomes the Hold time. In both functions, the unselected one has a set time of 100 m/sec.

When used with the other 200L series modules, a complete input strip can be built from input through dynamics, equalization, and final output.

The 235L makes use of the 2510 and 2520 op-amps and therefore exhibits the reliability, long life, and uniformity which are characteristic of API products.

Preis auf Anfrage

699.00 €



API 235L

API 235L

[zurück]